Fishing Tackle
Condition: New HAYABUSA XTREME-GLO SABIKI EX001 SIZE 8
Description Hayabusa Xtreme-GLO sabiki EX001 8 The best bait catching sabiki in the world, with Xtreme-glo!
$25.00
-
Condition: New HAYABUSA EX124 REAL PINK SHRIMP SABIKI SIZE 10
Description Hayabusa EX124 real shrimp sabiki 12 trong durable sabikis for koheru and macks, fluorcarbon branches and strong main line. Super sharp hooks.
$25.00
-
Condition: New HAYABUSA EX124 REAL PINK SHRIMP SABIKI SIZE 12
Description Hayabusa EX124 real shrimp sabiki 12 trong durable sabikis for koheru and macks, fluorcarbon branches and strong main line. Super sharp hooks.
$25.00
-
Condition: New HAYABUSA EX101 EXTREME GLO HAGE GRN 12
Description Hayabusa EX101 Xtreme-GLO Sabiki HAGE Green Fluorocarbon line HAGE FISH SKIN tougher fish skin than mackerel’s imitating small baitfish.
$25.00
-
Condition: New HAYABUSA EX130 UV PINK SKIN 12
Description Hayabusa EX130 UV pink skin Sabiki UV PINK SKIN Double glitter pink with ultra-violet twist skin and flasher creates the original glow effect and invites more bites.
$25.00
-
Condition: New HAYABUSA EX101 EXTREME GLO HAGE GRN 10
Description Hayabusa EX101 Xtreme-GLO Sabiki HAGE Green Fluorocarbon line HAGE FISH SKIN tougher fish skin than mackerel’s imitating small baitfish. With Xtreme lumo glow
$25.00
-
Condition: New PAKULA BRASS BALL BEARING SWIVEL KIT
Description This Pakula brass ball bearing swivel kit includes 30 pieces of double welded rings and coastlock snaps. A must have on the boat during game fishing season. Includes 5 x size 1 5 x size 3 5 x size 4 5 x size 5 5 x size 7 5 x size 9
$145.00
-
Condition: New PAKULA HAND CRIMPER DELUX
Description The Pakula Hand crimper is a high quality precision hand crimper Features Hardened steel jaws with four clearly marked crimping positions Swages both wire and mono nylon from 50lb to 450lb Includes 2 hardened side cutters Cushioned non-slip grips Specially plated jaws and handles for maximum saltwater resistance For use with aluminium or copper sleeves Features a safety and release lock
$149.00
-
Condition: New PAKULA RIGGING KIT 135 PC
Description RIGGING KIT INCLUDES: 30 X 1.7 SLEVES 30 X 2.0 SLEVES 30 X 2.3 SLEVES 20 X STAINLESS THIMBLES, SMALL 20 X STAINLESS THIMBLES, MEDIUM 5 X STAINLESS BALL BEARING SWIVEL WITH TWO WELDED RINGS + TOURNAMENT SNAP
$95.00
-
Condition: New PAKULA DOJO SHACKLE 4mm 4PK
Description The Pakula Shackle Rigâ„¢ was originally invented by Peter Pakula when trolling lures for Blue Marlin on the East Coast of Australia. It was a time when many lures of all types, including Pakula prototypes, were tried daily. This necessitated a rig that could easily and quickly be transferred between lures and also allowed the lure maximum freedom of action. The Pakula Dojo Peche Shackle Rigâ„¢ allows the hooks total freedom to line up with the lures centre, eliminating line twist. The hooks are free to swing, allowing the lure to exhibit its best possible action without hindrance or keeling effects. This gives the hooks the best possible chance of hooking up as they are able to work independently of each other.
$35.00
-
Condition: New PAKULA LUMO KEEL WEIGHTS 40 PKT5
Description Keeping hook points in the hook-up zone By letting the lure find it’s own balance and letting the hooks find their own balance you can increase their stability. Simply done by using ball bearing swivel in the rig. This separates the balance of the lure and rig and lets them do their own thing. Of course use the best quality swivel you can get and the rating should be more than the leader you are using, twice the rating is fine. As with all other gear you use, check it for strength before you use it. Note the piece of heat shrink that reduces the possibility of the rig wire hanging on the swivel ring. The ball bearing swivel is of most use with single hook rigs. Using the ball bearing swivel allows the lure to rotate through it’s cycle while the hook point remains upright in the Hot Zone, To achieve that the hook bend and point needs to be positioned outside the lure skirt. Shackles also allow the hooks to balance themselves. They are incredibly strong for their size, but once again check them before using them. Shackles are of most benefit using twin hook rigs. By splitting the heat shrink on the hook eye you allow the hook to find it’s own balance easily. Often stiff rigging the hook eye area results in hooks spinning and lures that have a strong head shake will fatigue the wire resulting in the hook falling off, often blamed on tooth critters or tough fighting fish. Note the heat shrink goes half way down the loop on the wire and half way up the hook eye. This reduces the chances of the hook hanging up on the wire loop. Use adhesive heat shrink on the hook. If you want a stiff rig then using a support such as hard heat shrink with adhesive lining or thin garden irrigation tube should be used to support the rig. But……. once again you are restricting the action of the hook and the action of the lure. This may or may not be what you want to achieve. Trollingr speed has an effect on the stability of the lure and rig. When you do your observations at the side of the boat it’s important to see if your lures and rigs are stable at your higher trolling speeds. You’ll find that many lures and rigs are quite stable at lower trolling speeds of 6,5 knots, but are unstable at higher speeds over 7.5 knots. You can adjust lures actions at slower trolling speeds by adjusting the distance of the lures from the boat, the positions on the boats pressure waves and the height the the lures are trolled ie outriggers. Note that you don’t have to troll lures off the tips of outriggers. The whole length of the outrigger offers adjustments all the way from their base to their tip. A well balanced twin hook rig ie the 60O shackle rig will out fish a standard single hook rig (of course this depends on balance) mainly because the two hooks have double the keel of a single hook. An easy way around getting this is keel the rig. The keels are just a long barrel sinker cut in half. I use a lot of them so mold my own in normal sinker molds, just pouring lead in half a mold. I also like panting them. As you can see I prefer Chartreuse as just about evey bait fish out there has a chartreuse tail. When using keels on rigs for fish that jump such as Marlin, Sails, Dorado the keel is attatched using a long skinny rubber band as shown below The keel sits flat half way up the eye of the hook to stop it rotating around the hook and you use enough wraps of the rubber band to stop the keel moving. The thin strands of the rubber band will wear through very quickly after the bite and fall off so it can’t be used as a pendulum to throw the hook. Using a keel will stabilise any skirted lure rig keeping the point in the Hot Zone. The weight of keel is relevant and should be checked through observation, but pretty much half a 4oz barrel sinker ie 2oz will keel most rigs from 9/0 to 11/0. So a final rig that is very stable and offers maximum hook up rates will look like this: The point will remain in the hot zone and allow the lure to do whatever it was designed to do. The length of the rig is important. The keel should be outside the skirt as much as practical with just the eye and the start of the keel inside the skirt.
$49.00
-
Condition: New GAMAKATSU 4/0 PINK SNAPPA FLASH
Description Gamakatsu Snappa Flasher Rigs Features: Top-of-the-line Gamakatsu circle hooks 70LBS trace Each rig also comes with it’s own handy plastic linewinder for easy storage Top quality Japanese mono, flash material & lumo beads Hand rigged entirely in NZ
$25.00
-
Condition: New GAMAKATSU 5/0 PINK SNAPPA FLASH
Description Gamakatsu Snappa Flasher Rigs Features: Top-of-the-line Gamakatsu circle hooks 70LBS trace Each rig also comes with it’s own handy plastic linewinder for easy storage Top quality Japanese mono, flash material & lumo beads Hand rigged entirely in NZ
$25.00
-
Condition: New GAMAKATSU 7/0 PINK SNAPPA FLASH
Description Snapper flasher rig is designed for NZ fishos in mind 2 Gamakatsu octopus hooks per rig High quality Japanese mono Flash material and lumo beads Hand rigged Designed for NZ fish 1 Rig per pack
$25.00
-
Condition: New NACSAN COPPER CRIMP 200-250LB 50PCES
Description Copper Double Crimps To Suit 200-250lb Quantity: 50
$19.00
-
Condition: New NACSAN COPPER CRIMP 250-300LB 30PCES
Description Copper Double Crimps To Suit 250-300lb Quantity: 30
$19.00
-
Condition: New NACSAN COPPER CRIMP 300-350LB 23PCES
Description Copper Double Crimps To Suit 300-350lb Quantity: 23
$19.00
-
Condition: New NACSAN IMPACT SHEILDS 12PKT
Description If you’re looking for an effective bait release system to increase casting distance then get yourself a a pack of these Nacsan Bait Impact Shields. Impact shields are essentially an upgraded and more advanced version of a simple bait clip that offer both protection to a bait as well as the aerodynamic advantages when casting. It’s slid onto the main rig body when making a rig and sit just behind the weight. The baited hook is clipped into the impact shield and when it hits the water it tilts to the side releasing the hook. It’s a simple yet clever design and very useful if you’re looking to reach big distances using delicate baits. Nacsan Bait Impact Shields Features: Holds baited hook securely in position during casting Holds bait in an aerodynamically efficient position during cast Increases casting distance Quantity per pack: 12
$19.00
-
Condition: New CENTRO RIGGING BAIT NEEDLE
Description A must have if your rigging skip baits these Stainless Steel open eye rigging needles are perfect. 3 x 23cm needles are packed in a reusable plastic tube for easy storage.
$19.00
-
Condition: New NACSAN RING AND GROMMET 6 PACK
Description The Ultimate for rigging lures and traces to prevent wear on your line
$25.00
-
Condition: New NACSAN THIMBLES S/S
Description 10x supplied in pack. 15mm long x 10mm wide 9at widest point). 5mm deep for placement of leader.
$19.00
-
Condition: New BLACK MAGIC S/S SHACKLES 430kg (2 PACK)
Description Standard size has a rating of 430kg+ Available in packets of 2 or boxes of 100
$16.00
-
Condition: New BLACK MAGIC SHARK TRACE 200KG
Description ?Black magic Shark Trace 5 metres of 200kg stainless steel wire wound onto a reuseable trace holder with a 10/0 closed gape forged stainless steel game hook.
$49.00
-
Condition: New BLACK MAGIC SNAPPER MCPILLY 5/0
Description Black Magic Flasher Snapper McPilly 5/0 The Snapper McPilly rig is built around our famous high carbon steel, chemically sharpened KL Red recurve hooks – fish usually hook themselves in the corner of the mouth, allowing for easy hook removal. -A special super rust-resistant coating is used on these hooks to ensure a long life -Available in KL Red 5/0 -Rigged using Black Magic 80lb Tough Trace and a 15kg barrel swivel -Soft lumo beads make the rigs even more enticing in deep water or at night -For extra appeal add a small triangle of bait – avoid blocking the gape -With bait attached you have everything working for you, a bait and a lure in one – fish will often hit on the “drop†or “retrieve†-Ideal for fishing from the beach, rocks, wharf or boat -Two hook rigs are IGFA legal for tournament use or record claims -Avoid striking when you feel a bite, just gently lift your rod tip as the fish takes -Black Magic flasher rigs are assembled and packaged in New Zealand, incorporating the best components, ensuring a quality product so you get the best results black, magic, flasher, snapper, mcpilly, 5/0, flashers, bait
$25.00
Our commitment to you
We're dedicated to providing you with the best possible shopping experience.
-
Free Shipping
Enjoy free delivery throughout New Zealand for most items, with the exception of large (big and bulky) items.
-
Peace of Mind
You are covered with a 7-Day Right of Return Policy and Extended Warranty options are available for purchase.
-
99% Locally Sourced
Our products are sourced locally through a variety of sellers across New Zealand, both private and retailers.
-
Sustainability & Waste
We use sustainable packaging and to promote waste reduction, we try our best to reuse this as well.
