Description Rectangular Flush Mount, 57 x 33mm

Read more less

Description Magnetic – Strong Holds Really Well Made in NZ by Nacsan Products Length 350mm Width 50mm Foam Non Scratch Attachments Velcro Locking Tie Downs Included Work Well Full Instructions Included

Read more less

Description The 12 Volt Removable Light Pole has telescopic 360° white riding lights with LED efficiency and durability. Fitted to a light weight aluminium pole with plastic base. Not only are the Fold Down Lights water resistant, they meet US Coast Guards COLREG 4nm A-16. Height: 610mm

Read more less

Description The Digital Voltage Sensing Relay (DVSR) allows the charging of a second battery bank from any single charging source. When the voltage on the charged bank rises sufficiently, the DVSR engages allowing the 2nd battery bank to charge. When charging stops and voltage falls, the DVSR automatically isolates the battery banks, ensuring that engine start batteries are kept fully charged. Digital circuitry provides superior reliability and extremely low power consumption. Digital enhancements have introduced remote sensing circuitry that allows an optional connection from the ignition switch to provide the same functionality as single sense VSR and zero power consumption when engine is off. Another benefit is a zero stand by current draw when remote sensing circuit is utilized with a storage mode switch fitted (switch in open position). Safely charge two or more independent battery banks from one charge source such as an alternator or battery charger Charges engine starting batteries before combining auxiliary bank for charging Protects start batteries from becoming flattened by domestic loads Isolates electronics from harmful electrical surges from starter motors Simple to install 3 wire connection leaves alternator wiring intact No volt drop vs diode isolators Ignition protected Surface or panel mountable Replaces previous models 710-125A and 710-125A-DS Multi voltage, auto selects between 12 and 24V DC operation Digital circuits provide very low power consumption and enhanced performance Remote status LED output option Continuous rating: 140 Engages: 13.2 VDC, Disengages: 12.7 VDC

Read more less

Description OVERVIEW The SOLIX 10 CHIRP MSI combines cutting-edge technologies like MEGA Side Imaging+, MEGA Down Imaging+, Dual Spectrum CHIRP Sonar and AutoChart Live on an ultra-clear Cross Touch® display. Take full advantage of the generous 10.1″ touchscreen display with customizable views and settings that allow you to see multiple technologies at once and find what you want quickly via the convenient side bar menu. Leverage the networking power of built-in Wi-Fi and NMEA 2000®, as well as Bluetooth® and Ethernet connections for compatibility with the One-Boat Network™ family of products from Humminbird, Minn Kota and Cannon.

Read more less

Description Charge two mobile devices on the go Made with corrosion resistant materials which ensure a solid contact and low voltage drop. Fits in same mounting hole as a traditional 12 Volt outlet Compatible with most mobile devices including Apple® products Protective dust cap with tether keeps dust and spray from shortening the life of the charger Conformal coated circuit board to stand up to the harsh marine environment 2A Supply fuse is not included Easy to install in existing 12V DC socket hole providing convenient access for charging mobile devices Specifications Maximum Output Current 2.1A DC (total) Cut Out Dimensions 1 1⁄8 in (28.58 mm) dia. hole Input Voltage 12V 24V Input Voltage Range 9-32V Output Voltage 5V DC +/- 5% Parasitic Current Draw 15mA Reverse Polarity Protection Yes Short Circuit Protection Yes Thermal Overload Protection Yes USB 2.0 Weight 0.10lb (0.05 kg)

Read more less

Description The RodStow rod holder system is a vertical fishing rod storage rack and caddy for boats. RodStow rod racks will hold your rods above deck, safely and securely, ready for your fishing experience. The RodStow Double is available in black or white, comes with stainless steel fasteners and can be installed in minutes. It features a storage caddy for lures, traces and other tackle, it’s even big enough to hold a small tackle box. These rod holders have a removable gimbal pin that you can leave in to support the rod and stop rotation, or remove to let the rod pass through. RodStow is a modular system, if you buy more you can add them together to make longer rod racks. Offset mounting is possible, giving you a solution for storing larger reels, without them hitting each other. The vertical RodStow rod rack is suitable for most rods and reels, including spinning, trigger, boat and game reels, and any length of fishing rod. Storage caddy for lures, traces and other tackle Tube size 40mm (1.57in) inside diameter Can holds gaffs, boat hooks or nets Removable gimbal pin to stop rod rotation Made from UV Stabilised, fibreglass reinforced engineering polymers Fits all rod lengths Stainless steel screws

Read more less

Description The RodStow rod holder system is a vertical fishing rod storage rack and caddy for boats. RodStow rod racks will hold your rods above deck, safely and securely, ready for your fishing experience. The RodStow Triple is available in black or white, comes with stainless steel fasteners and can be installed in minutes. It features a storage caddy for lures, traces and other tackle, it’s even big enough to hold a small tackle box. These rod holders have a removable gimbal pin that you can leave in to support the rod and stop rotation, or remove to let the rod pass through. RodStow is a modular system, if you buy more you can add them together to make longer rod racks. Offset mounting is possible, giving you a solution for storing larger reels, without them hitting each other. The vertical RodStow rod rack is suitable for most rods and reels, including spinning, trigger, boat and game reels, and any length of fishing rod. Storage caddy for lures, traces and other tackle Tube size 40mm (1.57in) inside diameter Can holds gaffs, boat hooks or nets Removable gimbal pin to stop rod rotation Made from UV Stabilised, fibreglass reinforced engineering polymers Fits all rod lengths Stainless steel screws

Read more less

Description Boat Seat Pedestal 178mm Description Boat Seat Pedestal 178mm Strong Construction, Mounts to most boat seats

Read more less

Description The Swing Arm R-Lock is a great addition to your RAILBLAZA kit, adding the Swing Arm R-Lock lets you swing your fish finder display out of the way, move your chart plotter to a better angle, or swivel your GoPro or iPad with ease. With R-Lock on the top, and a friction joint on the bottom, you can set your viewing angle, and then just swing it out of the way. Features: • Holds displays up to 1.5kg (3.3lbs) • Also holds tablets, GoPro, mobile phones • Good for all sounder makes, including Lowrance, Garmin, Humminbird • Goes with your RAILBLAZA Fish Finder Mount or other accessory • Made from UV Stabilised, fibreglass reinforced engineering polymers • Stainless steel screws

Read more less

Description Add to fuel before long-term storage of your engine. Prevents regular and ethanol-blended fuel from breaking down and oxidising. 30ml treats 19 Litres – a 355ml bottle treats 227 Litres.

Read more less

Description Oceansouth Outboard Motor Storage Full Covers are designed and tailored to fit specific Outboard Motor Models to give a secure close fit. FITS RANGE OF ENGINE SIZES – 2.5HP TO 400HP 380 gsm polyester canvas with an advanced coating technology assures maximum water resistance, UV protection & breath-ability. Elasticized hem & buckle fastening to ensure a smooth snug fit. Covers the Mercury Outboard from top to prop. Designed and tailored to fit Mercury outboard models

Read more less

Description MERCURY 4 STROKE 4 CYL 995CC 40HP 50HP 60HP (2008>) 20″ M20-20 25″ M20-25 Oceansouth Outboard Motor Storage Full Covers are designed and tailored to fit specific Outboard Motor Models to give a secure close fit. FITS RANGE OF ENGINE SIZES – 2.5HP TO 400HP 380 gsm polyester canvas with an advanced coating technology assures maximum water resistance, UV protection & breath-ability. Elasticized hem & buckle fastening to ensure a smooth snug fit. Covers the Mercury Outboard from top to prop. Designed and tailored to fit Mercury outboard models

Read more less

Description Soft felt lining for superior scratch protection Draw string ensures a snug fit every time UV-resistant, weather-proof and water-resistant fabric Reinforced top-stitched seams Available in 6 sizes, for both 2 & 4 stroke motors

Read more less

Description Universal Outboard Motor Engine Full Cover Non-Abrasive soft lining Woven nylon cord to pull cover securely around engine Size #10 Zipper runs the length of the shaft and covers the propeller Reinforce Top stitched seams Range of 8 sizes to suit all engine models, (2 and 4 stroke)

Read more less

Description Always the leader in portable fuel can technology, Scepter developed the original plastic Jerry Can and changed the industry forever. For almost half a century Scepter has continued to set the standard with evolving product features that are breaking new ground in away-from-the-pump fuel transport and transfer like the new Child Resistant Closures (CRC’s) available on their full line. All of Scepter Jerry Cans feature an extra Large, durable, molded-in handle that provides superior comfort, pouring and carrying ability. Scepter is your single source solution for Jerry Cans. Scepter Jerry Cans are virtually indestructible, manufactured from high-density, unbreakable polyethylene that is rustproof, crush-resistant and non-corroding. Features a reversible self-venting spout –no need to worry about separate vent closures Pouring spout attaches flush when not in use. Tough Polyethylene. For petrol, not diesel.

Read more less

Description – High density polythene construction | – Rustproof, non-corrosive, unbreakable | – Exceeds AUS/NZ/US/Can Standards | – Manufactured in Canada | – 5L Petrol

Read more less

Description Specially designed to fit the shape of runabout boats, our Runabout Covers protects your boat during storage and transport. Tailored fit across windscreen & smooth fit to stern. Fits boats with bow rails up to 250mm height, and windscreen up to 600mm height. Cyclone™ woven polyester fabric 300g/m2 – 9 oz/yd2. Trailerable and suitable for highway towing.

Read more less

Description Ideal for Centre Consoles Wider cut across beam accommodates centre console. Fits boats with bow rails up to 350mm height and console (from Gunwale) up to 800mm height. Cyclone™ woven polyester fabric 300g/m2 – 9 oz/yd2. Trailerable and suitable for highway towing.

Read more less

Description All Oceansouth Covers are light grey in colour and are made from a 600 denier premium woven dope dyed polyester fabric which is breathable and water repellent. They are designed to be semi custom fit covers and are a perfect choice when you need something to store your boat from the sun, rain, leaves, dust and birds. They are not really designed for trailing at high speeds however can be towed provided they are fitted tightly and correctly as per instructions.

Read more less

Description Keeping your large boat protected while towing has never been easier. With our Jumbo Cover, you can now safely tow your boat at speeds up to 60km/h. ORDER CODE BOAT LENGTH MAX. HEIGHT MAX. BEAM WIDTH MA 501-0 5.2m – 5.8m 1.35m 2.4m MA 501-1 5.8m – 6.4m 1.35m 2.4m MA 501-2 6.4m – 7.0m 1.35m 2.5m MA 501-3 7.0m – 7.6m 1.5m 2.7m MA 501-4 7.6m – 8.2m 1.5m 2.9m

Read more less

Description Many vessels are made to suit the mount base pattern of Scotty, RAM, Cannon, Fish-On, and many others. Now RAILBLAZA’s original accessories can easily be fitted to these vessels. Please note when fitting to Scotty glue pads, the screws are slighly too long, so an o-ring is needed under the screw head to stop the tube being pierced. After many, many requests we introduced a StarPort to fit straight into this space, the StarPort HD. This is a stylish, four screw base mount, which comes with the popular RAILBLAZA locking slide, and is lower in profile than others on the market.

Read more less