Description V Block – 145mm long x 45mm wide – 4 bolt mount

Read more less

Description V Block – 160mm long x 75mm wide – 4 bolt mount

Read more less

Description For connecting the Trailer Lights to the Tow Vehicle.

Read more less

Description This range of “no cable” antennas has been designed for boaties who want to remove and refit their antennas as required. These antennas have 3dBi gain. These antennas need to be mounted on our SeaMaster Pro range of mounts. 1.8m Ultraglass antenna. First choice for new installations on smaller sized boats. Superb performance and convenient size makes this antenna the industry standard. Half wave design with glass filled nylon ferrule. Mount this antenna on P6111, P6113 or P6115. Specifications Frequency VHF 156-162 MHz Radome Ultraglass Ferrule Nylon Antenna Type Half Wave Gain 3dBi “Marine Gain” 6dB Typical VSWR at 156.8 MHz 1.2:1 DC Meter Reading Open Circuit Height 1.8m

Read more less

Description Pro Series Antennas are a breakthrough: the only marine antennas in the world which can be removed and remounted on the boat at the user’s convenience. The cable is hardwired to the Pro Series mount, so the antenna can be removed without pulling or cutting the cable. SeaMaster Pro Series antennas are an excellent choice for new installations on small to medium sized boats. Robust, reliable and good looking, they will provide outstanding performance for years. SeaMaster Pro Series antennas must be used with SeaMaster Pro Series Mounts, which give the options of side, deck or rail mounting your antenna. 1.8m UltraGlass antenna with glass filled nylon ferrule. Enables radio coverage further out to sea. Mount this antenna on the P6714. These mount comes with 5m of cable and an AM/FM radio plug fitted. Specifications Frequency AM/FM Radome Ultraglass Ferrule Nylon Antenna Type Tuned Dipole DC Meter Reading Open Circuit Height 1.8m

Read more less

Description This range of “no cable” antennas has been designed for boaties who want to remove and refit their antennas as required. These antennas have 3dBi gain. These antennas need to be mounted on our SeaMaster Pro range of mounts. 1.8m Ultraglass antenna. First choice for new installations on smaller sized boats. Superb performance and convenient size makes this antenna the industry standard. Half wave design with glass filled nylon ferrule. Mount this antenna on P6711, this mount has 5m of cable and FastFit plugs. Specifications Frequency VHF 156-162 MHz Radome Ultraglass Ferrule Nylon Antenna Type Half Wave Gain 3dBi “Marine Gain” 6dB Typical VSWR at 156.8 MHz 1.2:1 DC Meter Reading Open Circuit Height 1.8m

Read more less

Description Pro Series Antennas are a breakthrough: the only marine antennas in the world which can be removed and remounted on the boat at the user’s convenience. The cable is hardwired to the Pro Series mount, so the antenna can be removed without pulling or cutting the cable. SeaMaster Pro Series antennas are an excellent choice for new installations on small to medium sized boats. Robust, reliable and good looking, they will provide outstanding performance for years. SeaMaster Pro Series antennas must be used with SeaMaster Pro Series Mounts, which give the options of side, deck or rail mounting your antenna. 1.0m UltraGlass antenna. The slimline features of this antenna make it a popular choice for the smaller boat or for a mastmount installation. Mount this antenna on the P6114, P6116, P6118 or P6169 mount. These mounts come with 5m of cable and an AM/FM plug fitted. Specifications Frequency AM/FM Radome Ultraglass Ferrule Nylon Antenna Type Tuned Dipole DC Meter Reading Open Circuit Height 1.0m

Read more less

Description Pro Series Antennas are a breakthrough: the only marine antennas in the world which can be removed and remounted on the boat at the user’s convenience. The cable is hardwired to the Pro Series mount, so the antenna can be removed without pulling or cutting the cable. SeaMaster Pro Series antennas are an excellent choice for new installations on small to medium sized boats. Robust, reliable and good looking, they will provide outstanding performance for years. SeaMaster Pro Series antennas must be used with SeaMaster Pro Series Mounts, which give the options of side, deck or rail mounting your antenna. 1.0m UltraGlass antenna. The slimline features of this antenna make it a popular choice for the smaller boat or for a mastmount installation. Mount this antenna on the P6714 mount. This mount comes with 5m of cable and an AM/FM plug fitted. Specifications Frequency AM/FM Radome Ultraglass Ferrule Nylon Antenna Type Tuned Dipole DC Meter Reading Open Circuit Height 1.0m

Read more less

Description TRANSDUCER EXT CABLE 20ft 7PIN BLUE

Read more less

Description Introducing the Fusion MS-UD650 Entertainment System with an internal, water resistant UNI-Dock for safe charging and playback of compatible* Apple iOS and MTP Android/Windows media devices. Bluetooth A2DP audio streaming capability and Fusion-Link NMEA 2000 connectivity make the 650 Series an all-in-one and purpose-built solution for entertaining on the water. Features: Internal UNI-Dock – Securely protect and charge and compatible* Apple iOS or MTP Android/Windows device while enjoying your favourite soundtrack. Fusion-Link® Control (Wired) – Direct stereo control from a compatible Multi-Function Display (MFD) or NRX Series wired remote control is available when utilizing an existing NMEA 2000 network. Visit www.fusion-link.com for compatible MFDs. Fusion-Link Control (Wireless) – Download the FREE Apple or Android Fusion-Link remote control app from the Apple® App Store or Google Play™ Store to control your on-board entertainment experience from a compatible Apple or Android device. Wireless Fusion-Link control is available over Bluetooth. A2DP/AVRCP Bluetooth® Streaming – Stream your family’s favorite soundtrack from any compatible device with track, album and artist info displayed, with navigation available from the stereo or connected device. Apple® iOS® and MTP Android™/Windows® Media Playback – Unparalleled support of the world’s most popular media devices, and the smartest interface for browsing your music library. Dual-USB – USB connectors are accessible internally and from the rear of the stereo to support your media device requirements. DAB+ Ready – Connect the optional Fusion DAB+ module (sold separately) to experience high quality digital radio and an expanding assortment of stations (Only accessible where DAB+ is supported). Optically Bonded LCD – The widescreen LCD display is optically bonded to improve durability and is optimized for daylight viewing. Multi-Zone™ Technology – Three independent audio zones are available, each with advanced localized menu controls, including zone naming. Note: Line Out zones require additional amplification. Class-D Amplifier – Provides higher RMS output than a standard stereo, for louder and clearer audio while drawing less current. (4 x 70W (@ 2 Ω)) Side-Fin Cooling – Amplifier components are optimally configured for the side-fin aluminium heat sink, producing greater thermal efficiency. Glass Filled Composite Chassis – Structurally rigid and incredibly lightweight, this improves environmental protection and electrically isolates the chassis for complete reliability. True-Marine Designed and Engineered – Extensively tested to perform in the harsh marine environment. 140mm L x 73mm W x 12mm D (5-1/2” L x 2-7/8” W x 1/2” D) Note: iPhone 6 Plus, iPhone 6s Plus and iPhone 7 Plus do not fit inside MS-UD650.

Read more less

Description After a long summer of use, have you checked the condition of your brake calipers? Salt water can be very damaging, and your brake calipers may require replacement due to corrosion. Trojan offer high-quality stainless-steel brake calipers, designed specifically for marine applications. These Trojan stainless-steel brake calipers come fitted with 304 graded stainless steel backed brake pads as standard. They will help avoid the often-costly issue of trailer braking systems seizing up due to corrosion. The issue of braking systems seizing up can be compounded if your trailer is immobile over the winter months. If you have inspected your brake calipers and they seem in good working condition, you may still want to check your brake pads for wear or separation. If they appear rusty or worn, consider upgrading to Trojan stainless-steel brake pads which have been specifically designed to prevent the separation of brake lining from backing plate due to corrosion damage.

Read more less

Description TOWBALL 50MM X 1″ SHANK 3500kg rated

Read more less

Description Made with highly resistant, marine-grade polymer, our low-back fisherman seats are available in 4 varieties. OCEANSOUTH BRAND Low-back, moulded folding seat High-Impact polymer shell UV-treated shell resists deterioration and fading Cushion and back insert upholstered in UV resistant marine-grade vinyl Suits standard 7″ (175mm) mounts or Titan Swivel Available as shell or in 3 upholstered colors

Read more less

Description The Oceansouth 3 in 1 port adjustable rod holder easily turns 1 exsisting rod holder into 3 Features Tough glass filled Polymer Tapered spacer for secure fit. Fits into standard rod holder. Adjustable angle mount leg.

Read more less

Description Product Details Voltage: 12 Assy: R Holddown: B3 Length: 230mm Width: 170mm Height: 210mm Weight: 14kg Brand: ENDURANT Product Category: Marine

Read more less

Description Oceansouth Vented Outboard Cover for Mercury Features: Made from Cyclone Protect premium woven dope dyed polyester fabric Protects your motor when fishing or skiing Protective soft felt inner lining Hem and Buckle fastening CAD pattern for professional fit Waterproof, Breathable and UV protection Mildew & Stain resistant Weight: 380 g/m2 – 11.21 oz/yd2 Material: Premium Woven Dope Dyed Polyester Fabric Features: Protective Soft Felt Inner Lining

Read more less

Description The Oceansouth Full Outboard Motor Cover is designed and tailored to fit specific Outboard Motor Models to give a secure close fit. This suits all Mercury Outboard models. It fits a range of engine sizes – DF2.5 to DF350. This Oceansouth Full Outboard Motor Cover is made of 380 gsm strong polyester canvas, with an advanced coating technology, ensuring maximum water resistance, UV protection and breathability. It has an elasticised hem and buckle fastening to ensure a smooth fit. It can cover the Mercury Outboard from top to prop. OCEANSOUTH Full Outboard Motor Cover for Mercury Features: 380 gsm polyester canvas Advanced coating technology Maximum water resistance, UV protection and breathability Elasticized hem and buckle fastening to ensure a smooth snug fit Covers the Honda Outboard from top to prop. Designed and tailored to fit Mercury outboard models OCEANSOUTH Full Outboard Motor Cover for Mercury Specifications: Product Code Leg Length Fits Engine Models M000-20 20″ Mercury 4 Stroke V8 4.6L – 250HP 300HP & 200-300PRO XS (2018>) M000-25 25″ Mercury 4 Stroke V8 4.6L – 250HP 300HP & 200-300PRO XS (2018>) M000-30 30″ Mercury 4 Stroke V8 4.6L – 250HP 300HP & 200-300PRO XS (2018>) M00-20 20″ Mercury Verado 6 CYL 2.6L – 400R, 225HP, 200HP, 250HP 300HP, 350HP, 200HP PRO, 250HP PRO, 300HP PRO (2005>) M00-25 25″ Mercury Verado 6 CYL 2.6L – 400R, 225HP, 200HP, 250HP 300HP, 350HP, 200HP PRO, 250HP PRO, 300HP PRO (2005>) M00-30 30″ Mercury Verado 6 CYL 2.6L – 400R, 225HP, 200HP, 250HP 300HP, 350HP, 200HP PRO, 250HP PRO, 300HP PRO (2005>) M02-20 20″ Mercury 4 Stroke V6 3.4L – 175HP 200HP 225HP & 175PRO XS (2018>) M02-25 25″ Mercury 4 Stroke V6 3.4L – 175HP 200HP 225HP & 175PRO XS (2018>) M02-30 25″ Mercury 4 Stroke V6 3.4L – 175HP 200HP 225HP & 175PRO XS (2018>) M05-20 20″ Mercury Verado 4 CYL 1.7L – 135HP 150HP 175HP 200HP (2005>) M05-25 25″ Mercury Verado 4 CYL 1.7L – 135HP 150HP 175HP 200HP (2005>) M10-20 20″ Mercury 4 Stroke 4 CYL 3.0L – 135HP 150HP VENTED COVER (2011>) M10-25 25″ Mercury 4 Stroke 4 CYL 3.0L – 135HP 150HP VENTED COVER (2011>) M15-20 20″ Mercury 4 Stroke 4 CYL 2.1L – 75HP 80HP 90HP 100HP 115HP (2014>) M15-25 25″ Mercury 4 Stroke 4 CYL 2.1L – 75HP 80HP 90HP 100HP 115HP (2014>) M20-15 15″ Mercury 4 Stroke 4 CYL 995cc – 40HP 50HP 60HP (2008>) M20-20 20″ Mercury 4 Stroke 4 CYL 995cc – 40HP 50HP 60HP (2008>) M20-25 25″ Mercury 4 Stroke 4 CYL 995cc – 40HP 50HP 60HP (2008>) M25-15 15″ Mercury 4 Stroke 3 CYL 747cc – 40HP (2008>) M25-20 20″ Mercury 4 Stroke 3 CYL 747cc – 40HP (2008>) M30-15 15″ Mercury 4 Stroke 3 CYL 526cc – 25HP 30HP (2007>) M30-20 20″ Mercury 4 Stroke 3 CYL 526cc – 25HP 30HP (2007>) M35-15 15″ Mercury 4 Stroke 2 CYL 333cc – 15HP 20HP (2018>) M35-20 20″ Mercury 4 Stroke 2 CYL 333cc – 15HP 20HP (2018>) M35-25 20″ Mercury 4 Stroke 2 CYL 333cc – 15HP 20HP (2018>) M40-15 15″ Mercury 4 Stroke 2CYL 209cc – 8HP 9.9HP (2006>) M40-20 20″ Mercury 4 Stroke 2CYL 209cc – 8HP 9.9HP (2006>) M45-15 15″ Mercury 4 Stroke 3 CYL 747cc – 40HP (2008>) M45-20 20″ Mercury 4 Stroke 3 CYL 747cc – 40HP (2008>) M45-25 20″ Mercury 4 Stroke 3 CYL 747cc – 40HP (2008>) M50-15 15″ Mercury 4 Stroke 1 CYL 85cc – 2.5HP 3.5HP (2007>) M50-20 20″ Mercury 4 Stroke 1 CYL 85cc – 2.5HP 3.5HP (2007>)

Read more less

Description MERCURY VERADO 4 CYL 1.7L 135HP 150HP 175HP 200HP (2005>) Made from CYCLONE PROTECT premium woven dope dyed polyester fabric. Protective soft felt inner lining. Hem & Buckle fastening. CAD pattern for professional fit. Waterproof, Breathable & UV protection.

Read more less

Description Features * Individually handcrafted * Handground convex edge design like rocket nose cone * Warranted for life against breakage under normal use * Highest quality carbon tool steel * Meticulously tempered blade * No stainless steel * All Svord knives are made in New Zealand

Read more less

Description Cushion to suit Icey Tek 90L Chilly Bin White. Velcros in place on lid. These are high quality cushions (Squabs) specifically designed to fit your Icey Tek

Read more less

Description The premium vinyl squab will compliment your Icey-Tek chilly bin and turn it into a handy extra seat. All squabs are in white, with black piping around the edge and embroidered Icey-Tek logo in the middle of the cushion. Each squab comes supplied with two strips of double-sided Velcro tape on the back so it can be fixed to the lid of your Icey-Tek, and then removed for storage from the weather when not in use.

Read more less

Description Cushion to suit Icey Tek 70L Chilly Bin White. Velcros in place on lid. These are high quality cushions (Squabs) specifically designed to fit your Icey Tek

Read more less

Description Cushion to suit Icey Tek 72/82L Chilly Bin White. Velcros in place on lid. These are high quality cushions (Squabs) specifically designed to fit your Icey Tek

Read more less

Description The premium vinyl squab will compliment your Icey-Tek chilly bin and turn it into a handy extra seat. All squabs are in white, with black piping around the edge and embroidered Icey-Tek logo in the middle of the cushion. Each squab comes supplied with two strips of double-sided Velcro tape on the back so it can be fixed to the lid of your Icey-Tek, and then removed for storage from the weather when not in use.

Read more less