Description Mounts onto any flat vertical surface. When not in use the unit folds down to protrude only 24mm. Fold out the retainers to hold glasses up to 75mm in diameter. Moulded in tough U.V. stabilised plastic. BLA Code Colour Size Folded mm Size Open mm Mount Screws mm 194110 Black 93 x 98 x 24 93 x 98 x 98 5 c/s 194111 Grey 93 x 98 x 24 93 x 98 x 98 5 c/s 194112 White 93 x 98 x 24 93 x 98 x 98 5 c/s

Read more less

Description Clean contoured shape to blend with the boats aesthetics. No edges to catch on ropes or crew. Led reliability, energy efficiency and low heat generation. Clear lens for maximum illumination. The red and green colour is created by the LED. High quality, UV stabilised plastic housing, 12 volt, sold as a pair. Dimensions: Base: 93x56mm Depth: 37mm Mount screws: 4mm c/s Black or White CODEs COVER COLOUR BASE MM DEPTH MM MOUNT SCREWS MM 121038 Black 90 x 56 37 4 c/s 121040 White 93 x 56 37 4 c/s

Read more less

Description Our Outboard Backing Plates are made from solid, UV resistant polypropylene and are available in both 8mm and 15mm thicknesses. Solid UV resistant polypropylene backing plate for outboard motor mounting. Smooth, rounded outer edge. Tapered shape for a clean, professional finish Available in two thicknesses: 8mm & 15mm

Read more less

Description – NZ’s most popular foam lifejacket – Two toned colour and branding – Top quality closed cell foam – Wave foam technology for quick drying – Sizes Infant, Child XX Small to Medium

Read more less

Description Store all your Safety Gear and it FLOATS! – Tarpaulin PVC+PE foam +210D lining – Size 58*26.5*33CM – Strong PE board on the bag bottom

Read more less

Description Balance loads, plane faster, increase efficiency and performance with Bennett BOLT Electric Trim Tab systems. BOLT is built to outlast any electric trim tab system on the market. Included in Kit 2x Stainless steel trim planes 9-inch x 12 inches (tabs) and mounting plates 2x 20ft harness with waterproof connectors (BAW2020) 2x 12-volt actuators with 6ft wire harnesses and waterproof connectors 1x Integrated LED indicator ( auto retract ) Helm Control

Read more less

Description Absorbs jerks from towing

Read more less

Description These new LED light boards can be operated using a standard 7-pin connector to your vehicle wiring loom. The LED lights have an ultra-long life expectancy and with the LED’s omitting 5-800 Lumens and a life expectancy in the region of 25000 hours. The boards are made of a high impact light weight plastic as well as the actual light casing made from high impact UV protected plastic polymer. Each light board comes with a 6m cable and 7-pin male connector. Available in 1.5m and 1.8m lengths.

Read more less

Description ACR 167 Piece Survival Kit great for the boat or to take camping. It is a survival first aid kit that is rugged enough to take everywhere and contains vital gear for worst case scenarios. The contents are organized for fast access and labeled with clear directions by emergency category. It is a water resistant nylon case perfect to take boating or camping. You can store it conveniently inside your grab bag or backpack in case of an emergency

Read more less

Description The 4 way fused, back-lit switch panels with fuse blown indicators are proudly designed and manufactured in New Zealand. Features: Soft green backlit labels to identify switch functions Clip on nylon cover conceals fuses and screws One piece back plate and rubber switches ensure water resistance Red LED light indicates switch operation (on) and fuse blown Fuse failed indication Switch rated to 15amps/12 volts Self-adhesive label set with operating functions, fuses and stainless steel fixing screws supplied Lifetime warranty

Read more less

Description Length of Blade (inches) 7 1/4″ Over All Length (inches) 12″ Blade Shape Santoku Handle Material Polypropylene Steel Specifications 15N20 or 12C27 Blade Thickness (mm) 1.6mm

Read more less

Description 10mm Hot Dipped Commercial Shackle. Galvanised, WLL 320kg

Read more less

Description The long running 14 amp hour (ah) battery comes complete with the leads attached ready to be used. The 14ah battery is used on the Seahorse Electric winch. In the Seahorse Kontiki it is used with a 8ah battery. BATTERY CARE All Lead Acid Batteries need to be kept fully charged. If they are left unchanged, then they will very quickly lose their capacity, and your run-time will shorten. Lead Acid Batteries will self discharge, and need to be topped up (every three months) if not being used. We recommend charging all you batteries after a fishing trip, whether they were used or not. We also suggest placing them on the charger before you go fishing to ensure they are fully charged. Remove the batteries from the Seahorse when charging. Try and use and charging the same batteries together. Labeling them is a good way to achieve this. Ensure your connectors are greased with melded grease every six months. BATTERY LIFE All sealed lead acid (SLA)batteries have a designed life (dropped to 60% of original capacity) of 3 to 5 years, depending on their application. They are designed to be kept fully charged and to be discharged slowly, over hours, not minutes. The Seahorse Kontiki discharges the batteries very quickly, and this effects their effective life. The Seahorse batteries have a 12 month warranty, and we expect they should last 2 years before you see a noticeable drop in performance. Having said that, we have seen batteries 5 years old, going better then new. Older batteries can be used on the winch, where the demands aren’t as high, or for shorter sets.

Read more less

Description This is a water-based, high concentrated concentration designed to prevent corrosion, break down and remove salt. It is safe to use on all surfaces making it perfect to flush out motors and wash boats to give your toys a greater life. It is biodegradable and non toxic so is safe you both you and the environment. Salt Away is a multi-purpose product designed to break down salt and prevent corrosion It can be flushed through the engine, added to water (and used to wash the boat) or applied directly to surfaces 100% High dense foaming to assists where has been applied and clings to surfaces to slowly soak through hard layers of salt Engine flush for inboard, outboard, I/O and personal watercraft engines General mix ratio 512 water : 1 Saltaway (Auto Mix does this automatically, 35022) 100% non hazardous 100% non-toxic 100% biodegradable Water based Inhibits rusting and corrosion Makes up to 480 litres

Read more less

Description Salt-Away is an engine flush for inboard, outboard, I/O and personal watercraft engines, and an exterior salt removing treatment for any surface where salt corrosion and build-up is a problem. Mixed with water, Salt-Away washes away the salt and if not raised off, leaves a protective film on the surface to prevent rusting and corroding, and protects it against future salt corrosion. It is easy to apply by using Salt-Away’s special Mixing Unit for bigger jobs or the ready-to-use spray bottles for smaller jobs. Items also may be immersed in a mixture of Salt-Away and fresh water and no rusting or corrosion will occur while immersed. .ROAD AND OTHER INDUSTRIAL SALT REMOVAL APPLICATIONS Car, Truck, Boat, Washers, Brakes, Exhaust Systems, Lawns, Foliage Part Number: Salt-Away Mixing Unit. Dispenses the Concentrate at a dilution ratio of 512 parts water to 1 part Concentrate. 1 Ltr Concentrate makes 512 Litres salt remove solution.

Read more less

Description Standby Stationary Battery

Read more less

Description The Seahorse Winch Buggy is a simple 2-wheel buggy to carry the winch and Kontiki (the heavy bits) from the car to the water’s edge and if needed, along the beach.

Read more less

Description PLASTIC ROD RACK PERFECT FOR HOME STORAGE HOLDS 16 RODS OR 8 ROD AND REEL COMBO’S CAN BE SET UP TO BE FREE STANDING (IMAGE 1 AND 2) OR FOR WALL MOUNTING (IMAGE 3)

Read more less

Description The Rule Mate series of bilge pumps features a solid state water sensing technology that eliminates the need for a separate float switch. When water enters the bilge and reaches a certain height a sensor turns the pump on, after the water is pumped out another sensor shuts the pump off. Comes with a tough plastic body with a quick release inlet strainer which allows for rapid cleaning. Low amp draw conserves batteries. No power drain until the pump starts. Ignition protected. 12V, 1100 GPH, 25mm or 29mm Discharge Outlet

Read more less

Description Rod Rack Horizontal Wall Mount Ideal for keeping your rods organised at the bach or at home. These Lightweight and durable racks attach to the wall easily. FEATURES & SPECS • Lightweight and Durable • Good Design • Hardware Included • Dimensions 219 x 170 x 25mm

Read more less

Description TENOB product. NZ made with pride. Nylon. These inserts or bushes will protect your fishing rods from rubbing against the tube and they also enhance the “look” of the rod holder. Fits metric sized 50mm outside diameter tube. Max. wall thickness 3mm. Suits thick (& thin) wall aluminium tube Colour: Aqua blue. Installation: The insert has a groove underneath into which the tube is pressed. Rest a block of wood (or similar) on insert and tap insert down onto tube with a hammer (note: it may be necessary to pre-warm insert in winter). Important note: Not suitable for imperial 2″ (50.8mm) tube. Refer RC10 instead.

Read more less

Description TENOB product. NZ made with pride. Nylon. These inserts or bushes will protect your fishing rods from rubbing against the tube edge and they also enhance the “look” of the rod holder. For imperial sized stainless steel (and thin wall aluminium) tube. Fits 2″ (50.8mm) outside diameter tube, max. wall thickness 1.5mm (minimum I.D. 1.7/8″ [47.7mm]).

Read more less

Description The new Power Assist electric reel battery enables you to fish any where on any boat or off the beach, No need to carry those bulky batteries any more, Before purchasing please ensure your Electric Reel is compatable to be used with this Battery, Battery Size 210mm x 50mm x 50mm Lead length inc plug 360 mm Fits the standard Shimano 9000 Forcemaster and the standard Shimano 9000 Beastmaster Battery Voltage 14.8 Volts Pack includes, 1 Battery with lead, (2 pin plug) 1 Charging unit 1 Battery bag with strap Charging Method 1/ Connect the charging unit to the battery, ensuring to line up the points on the connector, Failure to do this will short circuit the charger and battery, resulting in damage to the charger and battery. 2/Connect the charger to power supply 3/ When charging the indicator will be red in colour, When the battery is fully charged the light will turn green, 4/Charing time may vary from 5 – 10 hours depending on the level of power left in the battery after use. Intial charing time will be 8-10 hours, Safety Instructions Do not heat the battery or put in or near an open flame Do not insert any foreign objects into the battery or the battery connections Do not use for any other use other than power assist reels Please use the charger supplied with the battery Do not use the battery if it is damaged in any way. Do not use in temperatures above 50 *C (112*F) General Battery Tips Lithium Batteries have the following characteristics, There is an automatic circuit inside the battery , when it is not in use for a period of time , it will discharge naturally So if not in use for up to 3 months the battery will require recharging, During the winter months lithium batteries will loose up to 20 % of its power ,we classifiy this as normal. General Tips Please keep the battery in its case provided Please do not immerse the battery or its leads and terminals into water, If there is an abnormal odour or abnormal heat coming from the battery , please donot use the battery, Please ensure the battery is stored in a safe place when not in use, Please keep the battery out of reach of all children. Warranty 6 months form the date of purchase, proof of purchase must be supplied Any alteration to the battery, shell, charger,bag will void the warranty. Use of the battery other than the designed use will void the warranty. We accept no liabilty for any damge to any reel this battery may be used on

Read more less

Description Is a large, portable fuel container on wheels designed for industrial, commercial, and recreational applications. It is a safe, fast, and convenient way to refill lawn tractors, boat engines, generators, snowmobiles, ATVs, etc. This is ideally suited for farm and rural use as well as cottage and marine applications. Made from high density polyethylene, the fuel container is resistant to corrosion and denting. Its sturdy six-inch wheels and extra-deep handle make it easy to deliver fuel dockside when refueling boats or powered water craft. Two shut-off valves, at both the tank and hose connector, make it safe and easy to disconnect the Flo n’ go pump for refilling and transportation. Meets D.O.T. and UN transportation requirements. 53 Litre (14 Gallon) volume capacity and a 305 cm (10′) long fuel hose

Read more less