Description Ideal for Centre Consoles Wider cut across beam accommodates centre console. Fits boats with bow rails up to 350mm height and console (from Gunwale) up to 800mm height. Cyclone™ woven polyester fabric 300g/m2 – 9 oz/yd2. Trailerable and suitable for highway towing.

Read more less

Description All Oceansouth Covers are light grey in colour and are made from a 600 denier premium woven dope dyed polyester fabric which is breathable and water repellent. They are designed to be semi custom fit covers and are a perfect choice when you need something to store your boat from the sun, rain, leaves, dust and birds. They are not really designed for trailing at high speeds however can be towed provided they are fitted tightly and correctly as per instructions.

Read more less

Description Keeping your large boat protected while towing has never been easier. With our Jumbo Cover, you can now safely tow your boat at speeds up to 60km/h. ORDER CODE BOAT LENGTH MAX. HEIGHT MAX. BEAM WIDTH MA 501-0 5.2m – 5.8m 1.35m 2.4m MA 501-1 5.8m – 6.4m 1.35m 2.4m MA 501-2 6.4m – 7.0m 1.35m 2.5m MA 501-3 7.0m – 7.6m 1.5m 2.7m MA 501-4 7.6m – 8.2m 1.5m 2.9m

Read more less

Description Many vessels are made to suit the mount base pattern of Scotty, RAM, Cannon, Fish-On, and many others. Now RAILBLAZA’s original accessories can easily be fitted to these vessels. Please note when fitting to Scotty glue pads, the screws are slighly too long, so an o-ring is needed under the screw head to stop the tube being pierced. After many, many requests we introduced a StarPort to fit straight into this space, the StarPort HD. This is a stylish, four screw base mount, which comes with the popular RAILBLAZA locking slide, and is lower in profile than others on the market.

Read more less

Description Attach all RAILBLAZA accessories to your boat, kayak, or other surface using this accessory mount. The StarPort from RAILBLAZA is a versatile and unique mounting bracket that allows for the attachment of marine accessories such as rod holders to your boat, railings, kayak, inflatable, and other surfaces. Are you looking for a way to attach your marine accessories to your boat? The RAILBLAZA StarPort is a unique and multifunctional mounting bracket for boating accessories, that can be used in a number of different ways. The main purpose of the StarPort is to allow users to fit and swap out our full range of RAILBLAZA accessories onto power boats, inflatables, sail boats, kayaks, ATVs, garages and any other place you wish to place them. Made from high grade engineering plastics, the StarPort is not only stylish but easy to attach and can be surface or recess mounted. Because it takes all RAILBLAZA accessories and is so versatile, you will struggle to find a way in which the StarPort cannot be used. For example, if you are looking for a system in which you can attach your Rod Holder R or Rod Holder II to a rail then look no further. The StarPort can also be centrally mounted onto many popular track systems simply by adding our StarPort TracMount Kit (sold separately). RAILBLAZA StarPorts are the easiest way to hold things on your boat, kayak, or any other vessel. With our extensive range of rod holders, drink holders, phone holders, tablet holders, camera and sounder or transducer mounting, navigation lighting, and much more.

Read more less

Description Made from CYCLONE PROTECT Premium woven dope dyed polyester fabric Protective soft felt inner lining Hem & Buckle fastening CAD pattern for professional fit Waterproof, Breathable & UV protection M10-V Motor Size: 135-150HP Year: 2011+

Read more less

Description Made from CYCLONE PROTECT Premium woven dope dyed polyester fabric Protective soft felt inner lining Hem & Buckle fastening CAD pattern for professional fit Waterproof, Breathable & UV protection Motor Size: 40-60HP Year: 2008+

Read more less

Description Competitive anglers demand competitive monofilament, and here it is! Sufix Advance Clear Monofilament offers a stealthy approach with its invisible and transparent line, made from HMPE and hyper co-polymer materials. This premium monofilament offers 50% less stretch and UV absorption than standard monofilament. However tough the conditions are, its excellent abrasion resistance and impeccable knot strength make sure everything is secure. Thanks to its low memory, it can sustain its easy handling and casting distance very well through time. Its heightened sensitivity also gives it away as one of the most competitive monofilament lines in the market. Sufix Advance Clear Monofilament is available in 9 pound-test variants. Spool sizes range between 250 and 300 yards, depending on pound test. Features: The Sufix Advance Clear Monofilament 250-330 Yard Spool is a stealthy, transparent monofilament line. Premium monofilament made from HMPE and hyper co-polymer materials. 50% less stretch and UV absorption than standard monofilament. Excellent abrasion resistance and knot strength, low memory for improved handling and casting distance, and heightened sensitivity. Available in 9 pound-test variants.

Read more less

Description Tailored profile cut to accommodate cabin.Ideal for Cabin Cruisers Fits boats with bow rails up to 400mm height and windscreen or cabin up to 900mm height. Cyclone™ woven polyester fabric 300g/m2 – 9 oz/yd2. Trailerable and suitable for highway towing

Read more less

Description Our Outboard Backing Plates are made from solid, UV resistant polypropylene and are available in both 8mm and 15mm thicknesses. Solid UV resistant polypropylene backing plate for outboard motor mounting. Smooth, rounded outer edge. Tapered shape for a clean, professional finish Available in two thicknesses: 8mm & 15mm

Read more less

Description Store all your Safety Gear and it FLOATS! – Tarpaulin PVC+PE foam +210D lining – Size 58*26.5*33CM – Strong PE board on the bag bottom

Read more less

Description Absorbs jerks from towing

Read more less

Description These new LED light boards can be operated using a standard 7-pin connector to your vehicle wiring loom. The LED lights have an ultra-long life expectancy and with the LED’s omitting 5-800 Lumens and a life expectancy in the region of 25000 hours. The boards are made of a high impact light weight plastic as well as the actual light casing made from high impact UV protected plastic polymer. Each light board comes with a 6m cable and 7-pin male connector. Available in 1.5m and 1.8m lengths.

Read more less

Description ACR 167 Piece Survival Kit great for the boat or to take camping. It is a survival first aid kit that is rugged enough to take everywhere and contains vital gear for worst case scenarios. The contents are organized for fast access and labeled with clear directions by emergency category. It is a water resistant nylon case perfect to take boating or camping. You can store it conveniently inside your grab bag or backpack in case of an emergency

Read more less

Description Length of Blade (inches) 7 1/4″ Over All Length (inches) 12″ Blade Shape Santoku Handle Material Polypropylene Steel Specifications 15N20 or 12C27 Blade Thickness (mm) 1.6mm

Read more less

Description This is a water-based, high concentrated concentration designed to prevent corrosion, break down and remove salt. It is safe to use on all surfaces making it perfect to flush out motors and wash boats to give your toys a greater life. It is biodegradable and non toxic so is safe you both you and the environment. Salt Away is a multi-purpose product designed to break down salt and prevent corrosion It can be flushed through the engine, added to water (and used to wash the boat) or applied directly to surfaces 100% High dense foaming to assists where has been applied and clings to surfaces to slowly soak through hard layers of salt Engine flush for inboard, outboard, I/O and personal watercraft engines General mix ratio 512 water : 1 Saltaway (Auto Mix does this automatically, 35022) 100% non hazardous 100% non-toxic 100% biodegradable Water based Inhibits rusting and corrosion Makes up to 480 litres

Read more less

Description Salt-Away is an engine flush for inboard, outboard, I/O and personal watercraft engines, and an exterior salt removing treatment for any surface where salt corrosion and build-up is a problem. Mixed with water, Salt-Away washes away the salt and if not raised off, leaves a protective film on the surface to prevent rusting and corroding, and protects it against future salt corrosion. It is easy to apply by using Salt-Away’s special Mixing Unit for bigger jobs or the ready-to-use spray bottles for smaller jobs. Items also may be immersed in a mixture of Salt-Away and fresh water and no rusting or corrosion will occur while immersed. .ROAD AND OTHER INDUSTRIAL SALT REMOVAL APPLICATIONS Car, Truck, Boat, Washers, Brakes, Exhaust Systems, Lawns, Foliage Part Number: Salt-Away Mixing Unit. Dispenses the Concentrate at a dilution ratio of 512 parts water to 1 part Concentrate. 1 Ltr Concentrate makes 512 Litres salt remove solution.

Read more less

Description The Rule Mate series of bilge pumps features a solid state water sensing technology that eliminates the need for a separate float switch. When water enters the bilge and reaches a certain height a sensor turns the pump on, after the water is pumped out another sensor shuts the pump off. Comes with a tough plastic body with a quick release inlet strainer which allows for rapid cleaning. Low amp draw conserves batteries. No power drain until the pump starts. Ignition protected. 12V, 1100 GPH, 25mm or 29mm Discharge Outlet

Read more less

Description TENOB product. NZ made with pride. Nylon. These inserts or bushes will protect your fishing rods from rubbing against the tube and they also enhance the “look” of the rod holder. Fits metric sized 50mm outside diameter tube. Max. wall thickness 3mm. Suits thick (& thin) wall aluminium tube Colour: Aqua blue. Installation: The insert has a groove underneath into which the tube is pressed. Rest a block of wood (or similar) on insert and tap insert down onto tube with a hammer (note: it may be necessary to pre-warm insert in winter). Important note: Not suitable for imperial 2″ (50.8mm) tube. Refer RC10 instead.

Read more less

Description TENOB product. NZ made with pride. Nylon. These inserts or bushes will protect your fishing rods from rubbing against the tube edge and they also enhance the “look” of the rod holder. For imperial sized stainless steel (and thin wall aluminium) tube. Fits 2″ (50.8mm) outside diameter tube, max. wall thickness 1.5mm (minimum I.D. 1.7/8″ [47.7mm]).

Read more less

Description Is a large, portable fuel container on wheels designed for industrial, commercial, and recreational applications. It is a safe, fast, and convenient way to refill lawn tractors, boat engines, generators, snowmobiles, ATVs, etc. This is ideally suited for farm and rural use as well as cottage and marine applications. Made from high density polyethylene, the fuel container is resistant to corrosion and denting. Its sturdy six-inch wheels and extra-deep handle make it easy to deliver fuel dockside when refueling boats or powered water craft. Two shut-off valves, at both the tank and hose connector, make it safe and easy to disconnect the Flo n’ go pump for refilling and transportation. Meets D.O.T. and UN transportation requirements. 53 Litre (14 Gallon) volume capacity and a 305 cm (10′) long fuel hose

Read more less

Description The Precision Pak Jetski Seat top tackle bag helps solve that PWC problem of lack of storage space, this bag solves that perfectly. The top bags work by themselves or in combination with Precision Pak Saddle Bags, they were literally made for each other. The unique strapping system is patented and works like a dream keeping your gear near and safe. These bags are great for giving the rider secure storage for loads of tackle, or extra room for camera gear and personal items. There are multiple zippered compartments for gloves, hats, sun screen, etc. The large main compartment has an adjustable divider secured with Velcro.

Read more less

Description The PRO CURE Scent Spray is made of 100% Real Baitfish, UV enhanced, and loaded with amino based bite stimulants. Comes in an easy to use 4oz Spray bottle. PRO CURE Scent Spray Features: Made of 100% real baitfish Water soluble Penetrates water column faster UV enhanced Loaded with amino acid based bite stimulants to trigger strikes Puts off a more intense scent Apply to any artificial lure or plastics Available in easy to use 4oz spray bottle

Read more less

Description The PRO CURE Scent Spray is made of 100% Real Baitfish, UV enhanced, and loaded with amino based bite stimulants. Comes in an easy to use 4oz Spray bottle. PRO CURE Scent Spray Features: Made of 100% real baitfish Water soluble Penetrates water column faster UV enhanced Loaded with amino acid based bite stimulants to trigger strikes Puts off a more intense scent Apply to any artificial lure or plastics Available in easy to use 4oz spray bottle

Read more less